Modelling and predicting the spatial dispersion of skin cancer considering environmental and socio-economic factors using a digital earth approach     

Zohreh Masoumi  John L. van Genderen  Mohammad Sadi Mesgari 《International Journal of Digital Earth》2020,13(6):661-682

ABSTRACT

Almost all causative factors of diseases depend on location. The Digital Earth approach is suitable for studying diseases globally. Geospatial information systems integrated with statistical models can be used to model the relationship between a disease and its causative factors. Through modelling, the most important causative factors can be extracted and the epidemiology of the disease can be observed. In this paper, skin cancer (the most common type of cancer) has been modelled based on its causative factors, including climate factors, people's occupations, nutrition habits, socio-economic factors, and usage of chemical fertiliser. To fit the model, a data framework was first designed, and then data were gathered and processed. Finally, the disease was modelled using Generalised Linear Models (GLM), a statistical model based on the location of the factors. The results of this study identify the most important causative factors together with their relative priority. Furthermore, a model was used to predict the change in skin cancer occurrences caused by a change in one of its causative factors. This work illustrates the ability of the model to predict disease occurrence. Thus, by using this Digital Earth approach, skincancer can be studied in all the key countries around the world.  相似文献   

Transient analysis of wave propagation in non‐homogeneous elastic unbounded domains by using the scaled boundary finite‐element method     

Mohammad Hossein Bazyar  Chongmin Song 《地震工程与结构动力学》2006,35(14):1787-1806

The scaled boundary finite‐element method has been developed for the dynamic analysis of unbounded domains. In this method only the boundary is discretized resulting in a reduction of the spatial dimension by one. Like the finite‐element method no fundamental solution is required. This paper extends the scaled boundary finite‐element method to simulate the transient response of non‐homogeneous unbounded domains with the elasticity modulus and mass density varying as power functions of spatial coordinates. To reduce the number of degrees of freedom and the computational cost, the technique of reduced set of base functions is applied. The scaled boundary finite‐element equation for an unbounded domain is reformulated in generalized coordinates. The resulting acceleration unit‐impulse response matrix is obtained and assembled with the equation of motion of standard finite elements. Numerical examples of non‐homogeneous isotropic and transversely isotropic unbounded domains demonstrate the accuracy of the scaled boundary finite‐element method. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Ground viscosity and stiffness measurements for near surface seismic velocity   总被引：1，自引：0，他引：1  

Robert Ley  Willem Adolfs  Ralph Bridle  Mohammad Al-Homaili  Aldo Vesnaver  Paul Ras 《Geophysical Prospecting》2006,54(6):751-762

In land surveys, the weathering layer can often distort the seismic signal due to it passing through rapid velocity and density changes, dispersion, scattering and inelastic absorption. In a simple spring‐dashpot model for the earth response, an equivalent medium groups these complex phenomena into two parameters only; these are called ground viscosity and ground stiffness. The most recent controllers for vibrators can estimate both parameters. To validate these measurements, Saudi Aramco conducted an experiment measuring ground viscosity and stiffness from two different vibrator control systems over an area of varying terrain conditions, including unconsolidated sand and limestone outcrop. The two systems measured different values, but detected similar trends that correlated well with weathering conditions and surface geology, e.g. lower viscosity values on the outcrop than on the sand. The ratio of ground viscosity to ground stiffness can approximate the shallow S‐wave velocity, which we converted into P‐wave velocity through calibration with sparse uphole data. Static corrections incorporating this velocity information somewhat improved the focusing of seismic time sections. This new approach does not require additional acquisition efforts, and can model shallow complex formations in arid areas where classical static methods often fail.  相似文献   

Kinetics of copper desorption from soils as affected by different organic ligands     

E. A. Elkhatib Ph.D.  A. M. Mahdy Ph.D.  M. E. Saleh Ph.D.  N. H. Barakat M.Sc. 《International Journal of Environmental Science and Technology》2007,4(3):331-338

Desorption of Cu and low molecular weight dissolved organics are the primary factors that impact fate and transport of Cu in soils. To improve predictions of the toxicity and threat from Cu contaminated soil, it is critical that time-dependent desorption behavior be understood. In this paper, the effect of organic ligands citrate, malate, and succinate on the kinetics of Cu desorption from contaminated soils varying widely in soil characteristics was investigated at 25° C and the soils used were referred to as clay, calcareous and sandy soils. The amount of Cu released by the used organic ligands varied greatly with physicochemical properties of the soils. The rate of Cu release by different extractants was in the order citric > malic > succinic, which was consistent with the stability constants of Cu complexes with these ligands. The modified Freundlich and the Elovich and Parabolic diffusion models were used to describe dsorption of Cu²⁺ from the three studied soils as affected by the organic ligands. All of the models fit the data well with correlation coefficients ranging from 0.83 to 1.00 (P < 0.01). Each Model has a set of assumptions for the different physical and chemical properties of the systems to which they are being applied. The uses of these equations yield different magnitudes for the calculated variable, but the relationships between the soil + organic ligands and their effect (i.e., increase or decrease) on these variables are the same. Such information is critical, since Cu is used in a variety of industrial and manufacturing processes and is one of the most common contaminants found at hazardous waste sites.  相似文献   

Geology and rare-earth element geochemistry of highly evolved, molybdenite-bearing granitic plutons, Southeastern Desert, Egypt     

Gehad M. Saleh 《中国地球化学学报》2007,26(4):333-344

The field relations, mineralogy, and major and trace elements (including REE analyses of whole-rock samples and minerals) of granites and their associated molybdenite uranium mineralized aplites in Southeastern Desert, Egypt, have been studied. The granites are leucocratic and mostly peraluminous in nature with muscovite increasing at the expense of biotite. The chemical and mineralogical characteristics of the granitic rocks indicate that their melts originated from the LILE-enriched mantle wedge by partial melting and are contaminated by crustal melts, followed by thermogravitational processes. Leucogranites with higher Na2O/K2O ratios from Um Dargag and Um Maiat crystallized under H2O-saturated equilibrium conditions in which the exsolved vapor continuously migrated away. The REE patterns of the granites studied are characterized by LREE enrichments and negative Eu anomalies. In comparison, the potassic aplites and the more sodic leucogranites are depleted in LREE, enriched in HREE and show more remarkable negative Eu anomalies. Allanite and monazite are the most important REE carriers in the granites. These minerals are strongly enriched in LREE, whereas fluorite and xenotime, which are more abundant in the aplites, are enriched in HREE. The average Lu/Ce ratio represents the fractionation trend with respect to HREE. It is 0.71 for radioactive fluorite, and it increases to 1.22 for non-radioactive fluorite. The high REE contents of molybdenite represent re-deposition of the mobilized Mo and REE. Due to the strong control of accessory minerals, the REEs are of limited use in petrogenetic modelling of highly evolved granitic systems.  相似文献   

Early Cretaceous sedimentary provenance and structural evolution of the central Sanandaj–Sirjan Zone,Iran: implications for palaeogeographic reconstructions of the northern Neo-Tethyan margin     

Mohammad Ali Salehi  Meisam Tadayon 《International Geology Review》2020,62(11):1359-1386

ABSTRACT

The Early Cretaceous was an important epoch in the evolution of the Earth system in which major tectonic episodes occurred, especially along the Alpine–Himalayan belt. The paucity of reliable palaeogeographic data from the central segment of this geological puzzle, however, hampers the reconstruction of a panoramic view of its Early Cretaceous palaeogeography and geodynamic setting. Here we present multidisciplinary provenance data from Lower Cretaceous strata of the overriding plate of the Neo-Tethyan subduction zone (the Sanandaj–Sirjan Zone; SSZ, of central Iran), including structural, basin-fill evolution, petrographic and geochemical analyses. Sandstone provenance analysis of Lower Cretaceous red beds suggests the occurrence of sub-mature litho-quartzose sandstones attributed to an active continental arc margin in convergent setting predominantly derived from plutonic, quartzose sedimentary and metamorphic rocks exposed in the central SSZ. Weathering indices indicate moderate chemical weathering in the source area which may be related to close source-to-sink relationships or arid climate. Our palaeogeographic reconstructions and original geological mapping indicate that the erosion of uplifted basement rocks exposed in horst blocks provided the sediment sources for the syn-extensional deposition of uppermost Jurassic–lowermost Cretaceous conglomerates and Lower Cretaceous siliciclastic red beds within a continental retro-arc basin during initiation of the ‘Neo-Tethys 2?. The polyphase tectonic reactivation along the principal fault of the study area controlled the syn- and post-extensional tectonostratigraphic evolution that reflect the corresponding mechanical decoupling/coupling along the northern Neo-Tethyan plate margin.  相似文献   

On the occurrence and origin of anthropogenic radionuclides found in a fragment of the Chelyabinsk (LL5) meteorite          下载免费PDF全文

Rebecca Querfeld  Mohammad R. Tanha  Lars Heyer  Franz Renz  Georg Guggenberger  Franz Brandstätter  Ludovic Ferrière  Christian Koeberl  Georg Steinhauser 《Meteoritics & planetary science》2017,52(6):1244-1250

A piece of the 2013 Chelyabinsk meteorite was investigated for its content of anthropogenic radionuclides. In addition to traces of cesium‐137 that had been previously reported for this particular fragment, we found an unusually high amount of strontium‐90, which indicates that the source of this contamination was the Kyshtym accident (1957). A high Sr‐90/Cs‐137 activity ratio is characteristic for Kyshtym‐derived contaminations. Based on the cesium‐137 content in the soil from the finding site, it is estimated that the fragment was contaminated with soil particles in the milligram range upon impact. Investigation of the soil revealed very unusual ferromagnetic characteristics and an iron‐rich chemical composition. Mössbauer spectroscopy indicated the presence of steel components in this soil, suggesting that the investigated meteorite fragment was found in an industrial dumping site rather than natural soil.  相似文献   

Three‐dimensional nonlinear finite element analysis of pile groups in saturated porous media using a new transmitting boundary     

Mohammad Reza Maleki Javan  Asadollah Noorzad  Manouchehr Latifi Namin 《国际地质力学数值与分析法杂志》2008,32(6):681-699

The dynamic behaviour of pile groups subjected to an earthquake base shaking is analysed. An analysis is formulated in the time domain and the effects of material nonlinearity of soil, pile–soil–pile kinematic interaction and the superstructure–foundation inertial interaction on seismic response are investigated. Prediction of response of pile group–soil system during a large earthquake requires consideration of various aspects such as the nonlinear and elasto‐plastic behaviour of soil, pore water pressure generation in soil, radiation of energy away from the pile, etc. A fully explicit dynamic finite element scheme is developed for saturated porous media, based on the extension of the original formulation by Biot having solid displacement (u) and relative fluid displacement (w) as primary variables (u–w formulation). All linear relative fluid acceleration terms are included in this formulation. A new three‐dimensional transmitting boundary that was developed in cartesian co‐ordinate system for dynamic response analysis of fluid‐saturated porous media is implemented to avoid wave reflections towards the structure. In contrast to traditional methods, this boundary is able to absorb surface waves as well as body waves. The pile–soil interaction problem is analysed and it is shown that the results from the fully coupled procedure, using the advanced transmitting boundary, compare reasonably well with centrifuge data. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

Limiting equilibrium method for slope/drilled shaft system     

Mohammad Yamin  Robert Y. Liang 《国际地质力学数值与分析法杂志》2010,34(10):1063-1075

The use of drilled shafts to stabilize an unstable slope has been a widely accepted practice. There are two basic design and analysis issues involved: one is to determine the global factor of safety of the drilled shafts stabilized slope and the other one is to determine the design earth thrust on the drilled shafts for structural design of the shafts. In this paper, a limiting equilibrium method of slices based solution for calculating global factor of safety (FS) of a slope with the presence of a row of drilled shafts is developed. The arching mechanisms due to the presence of the drilled shafts on slope were taken into account by a load transfer factor. The method for calculating the net force applied to the drilled shaft from the soil mass was also developed. The interrelationships among the drilled shaft location on the slope, the load transfer factor, and the global FS of the slope/shaft system were derived utilizing the developed numerical closed‐form solution. An illustrative example is presented to elucidate the use of the solution in optimizing the location of the drilled shafts on slope to achieve the desired global factor of safety of the slope/shaft system. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Mineral chemical composition and geodynamic significance of peridotites from Nain ophiolite,central Iran     

Javad Mehdipour Ghazi  Mohssen Moazzen  Mohammad Rahgoshay  Hadi Shafaii Moghadam 《Journal of Geodynamics》2010,49(5):261-270

The peridotites from north of the town of Nain in central Iran consist of clinopyroxene-bearing harzburgite and lherzolite with small lenses of dunite and chromitite pods. The lherzolite contains aluminous spinel with a Cr number (Cr^# = Cr/[Cr + Al]) of 0.17. The Cr number of spinels in harzburgite and chromitite is 0.38–0.42 and 0.62, respectively. This shows that the lherzolite and harzburgite resulted from <18% of partial melting of the source materials. The estimated temperature is 1100 ± 200 °C for peridotites, the estimated pressure is <15 ± 2.3 kbar for harzburgites and >16 ± 2.3 kbar for lherzolites and estimated fo₂ is 10^?1±0.5 for peridotites. Discriminant geochemical diagrams based on mineral chemistry of harzburgites indicate a supra-subduction zone (SSZ) to mid-oceanic ridge (MOR) setting for these rocks. On the basis of their Cr^#, the harzburgite and lherzolite spinels are analogous to those from abyssal peridotites and oceanic ophiolites, whereas the chromites in the chromitite (on the basis of Cr^# and boninitic nature of parental melts) resemble those from SSZ ophiolitic sequences. Therefore, the Nain ophiolite complex most likely originated in an oceanic crust related to supra-subduction zone, i.e. back arc basin. Field observations and mineral chemistry of the Nain peridotites, indicating the suture between the central Iran micro-continent (CIM) block and the Sanandaj–Sirjan zone, show that these peridotites mark the site of the Nain–Baft seaway, which opened with a slow rate of ocean-floor spreading behind the Mesozoic arc of the Sanandaj–Sirjan zone as a result of change of Neo Tethyan subduction régime during middle Cretaceous.  相似文献